Allparts Neck SRO-62 Stratocaster® neck. Radio 7'25. Rosewood. Venner. FINISHED

The SRO-62 replacement Stratocaster® neck is "Officially Licensed by Fender®" and manufactured to strict quality standards in Japan. Staying true to Fender® specifications from 1962, our SRO-62 offers a pre-radiated neck with a veneered rosewood fingerboard. Unlike traditional vintage "slab board" fingerboards, the SRO-62 offers a "venner board" fingerboard that provides more contact surface between the neck and fingerboard, adding a stronger bond for a stiffer, more stable neck. With its vintage frets and 7.25" fingerboard radius, this neck is a true throwback to the golden era of rock n' roll! Unfinished and ready to spray, you can finish our SRO-62 any way you like!

Specifications

• Scale Length: 25.5
• Neck Profile Shape: C
• Frets: 21 Tall (0.079" x 0.053")
  
• Wood: Maple with veneered rosewood fretboard
• Finish: None/Unfinished
• Fretboard Radius: 7.25"
• Inlays: White fretboard and side marker dots
• Nut Width: 1-5/8"
• Heel Width: 2-3/16"
• Heel Shape: Round
• Tuning Peg Holes: Vintage 2-step hole
  
• 0.34" (8.5mm) bushing-hole diameter
• 0.25" (6.5mm) post-hole diameter
• Truss Rod Adjustment Location: Heel
• Neck Thickness:
• 0.85" at first fret
• 0.96" at twelfth fret

Important notes

• Wood grain varies from neck to neck. Your neck may differ slightly from what is shown in the photo.
• All masts come with a limited lifetime warranty against defects in materials and workmanship.
• All necks may require fret leveling and polishing. This is normal and not a defect.
• To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.
• This neck is licensed by Fender® Musical Instruments to Allparts Music Corporation under a Quality Control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.

“Full service” consists of:

• Painted and lacquered in nitrocellulose.
• Aged and relic.
• Rounding of the edges of the fingerboard.
• Leveling to correct any possible micro unevenness that may exist.
• Polishing the frets.
• Removal of white spots if necessary.
• Custom bone nut.